Sprinker Recreation Center - Renovation

We started working on an ice skating arena renovation using Revit Structure Suite 2009. PBK Architects (out of Vancouver, BC) was the prime consultant, and the project was located in Tacoma WA. We modeled the existing conditions in order to provide an accurate baseline for the proposed renovations and additions.


We were able to model connections of the existing bearing conditions. The joists used back in the '70's are no longer in widespread use today - we had to research old catalogs, and develop our own joist family to model the unique  shapes used at the top and bottom chord conditions - bearing details were also interesting...

An adjacent structure housed the covered tennis court area. We modeled the all-steel, haunched moment-frame building accurately as an elevated running track was proposed to be suspended from these elements, and many connections and section cuts going to be made to adequately convey the design intent.

We were able to model various scenarios at a new court addition to look at both vertical and lateral systems. We were able to model these in fairly short order to review them schematically and aesthetically with our client.








 We modeled significant elements so that detailing could be easily accomplished. This inclined post base was modeled and then duplicated as necessary in the project.





 

 We were able to add new connections and members to the existing model as needed to show phasing of work, and revised conditions as appropriate. It was a little finicky at times, but the final result is clear communications about connections and detailing...

We thoroughly enjoyed working on the project. Even though the "plug has been pulled" on this interesting project, it is one that might spring to life again here soon, and we look forward to picking this back again...